• Part Number: UTGC1-G
• Gage body: Standard 
• Probe type: 5 MHz Dual Element (PRBUTGC-C)
• Measuring range: 0.040" to 5.000" (1.00 to 125.00mm)
• Application: Corrosion
• Conforms to national and international standards including ASTM E797
• Pre-programmed velocities - select from list of common materials or enter your own
• Smart Couple eliminates inadvertent decoupling 
• High contrast LCD with backlit display
• Single or two point adjustment
• Inch/mm switchable
• Built-in temperature compensation ensures measurement accuracy
• Precision ultrasonic transducers provide fast, accurate readings
• Min Scan mode—take continuous readings and record min/max thicknesses
• HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits
• Weatherproof - resistant to dust, water, acid, solvent, and oil

• Application:
• UTG C/UTG CA: Corrosion; 
  
• UTG CX: Corrosion Xtreme;
• UTG CLF: Low Frequency;
• UTG M: Multiple Echo;
• UTG P: Precision
• Probe Type: 
• UTG C: 5 MHz Dual Element; 
• UTG CA: 5 MHz Dual Element; 
• UTG CX: 5 MHz Dual Element;
• UTG CLF: 2.25 MHz Dual Element;
  
• UTG M: 5 MHz Contact;
• UTG P: 15 MHz Single Element Delay Line.
• Mode:
• UTG C: Single Echo;
• UTG CA: Single Echo; 
  
• UTG CX: Single Echo;
• UTG CLF: Single Echo;
• UTG M: Single and Multiple Echo;
• UTG P: Steel and Plastic.
• Measurement Range*:
• UTG CA: 0.040" to 5.000" (1.00 to 125.00mm); 
  
• UTG CX: 0.040" to 5.000" (1.00 to 125.00mm); 
• UTG CLF: 0.040" to 5.000" (1.00 to 125.00mm); 
• UTG M: Single: 0.100" to 5.000" (2.50 to 125.00mm), Multiple: 0.100" to 2.500" (2.50 to 60.00mm)
• UTG P: Steel: 0.008" to 0.475" (0.2 to 12.0 mm), Plastic: 0.005" to 0.175" (0.125 to 4.500 mm)
• Thru-Paint Capability: 
• UTG C: No;
• UTG CA: No; 
• UTG CX: No;
• UTG CLF: No;
• UTG M: Yes;
• UTG P: Yes.
• Resolution:
• UTG C: 0.001" (0.01mm);
  
• UTG CA: 0.001" (0.01mm);
• UTG CX: 0.001" (0.01mm);
• UTG CLF: 0.001" (0.01mm);
• UTG M: 0.001" (0.01mm);
  
• UTG P: 0.0001" (0.002 mm).
  
• Accuracy:
• UTG C: ± 0.001" (± 0.03mm);
  
• UTG CA: ± 0.001" (± 0.03mm);
• UTG CX: ± 0.001" (± 0.03mm);
• UTG CLF: ± 0.001" (± 0.03mm);
• UTG M: ± 0.001" (± 0.03mm);
  
• UTG P: ± 0.0004" (± 0.01 mm).
  
• Conforms to: ASTM E797
• *Measurement range is for carbon steel and depends upon surface condition, temperature and material.

• (1) PosiTector Standad gage body
• (1) PRBUTGC probe
• (1) Couplant (ultrasonic gel)
• (1) Protective rubber holster with belt clip
• (1) Wrist strap
• (3) AAA alkaline batteries
• (1) Instructions
• (1) Protective lens shield
• (1) Convenient carrying case
• (1) Long Form Certificate of Calibration traceable to NIST or PTB
• (1) USB cable
• (1) PosiSoft Software
• (1) Two (2) year warranty

Brochure/Datasheet

Instruction Manual

PosiTector App Android

PosiTector App iOs

PosiSoft Desktop - Windows

PosiSoft Desktop - MAC

Note: Prices are not binding at any time subject to change without prior notice